論文：Experimental and Simulation Study on the Improvement of Heat Transfer Coefficient Using Sintered Porous Materials
Click here to Read the Ph.D dissertation

論文：繊維状金属焼結管に関する伝熱および圧力損失特性の実験的解明
Thesis: Experimental Investigation of Heat Transfer and Pressure Drop Characteristics of Fibrous Sintered Metallic Tubes

論文：連通流路を用いた積層型並列微細流路熱交換器の偏流および逆流抑制による飛躍的な熱交換効率向上に関する研究
Thesis: Study on drastic improvement of heat exchange efficiency by suppression of deviation and backflow in a laminated parallel microchannel heat exchanger with interconnecting channels

論文：繊維状金属焼結管を用いたガス側の伝熱特性に関する実験およびシミュレーション研究
Thesis: Experimental and simulation study on heat transfer characteristics on the gas side using sintered fibrous metallic tubes

論文：混合冷媒 R 32 / R 1234yf の混合比率変化による伝熱面近傍におけるプール核沸騰熱伝達の特性解明実験
Thesis: Refrigerant mixture R 32 / R 1234yf at different mixing ratios Experiments to elucidate the characteristics of pool nucleate boiling heat transfer on the heat transfer surface

論文：焼結型高気孔率金属繊維多孔質体伝熱面における強制サブクール沸騰熱伝達に関する研究
Thesis: The enhancement of subcooled flow boiling heat transfer with high porosity sintered fiber metal

論文：透過性と管摩擦係数を用いた焼結型繊維状多孔質管内における圧力損失特性の解明と整理式の構築
Thesis: Calculation Method of the Frictional Pressure Drop for Sintered Fibrous Porous Pipes with Permeability and Friction Factor

論文：波状形状を有する微細管内における気液二相流の沸騰熱流動特性に関する研究
Thesis: Boiling Thermal-hydraulics Characteristics of Vertical Upward Vapor-liquid Two-Phase Flow in Wavy Mini-channel

論文：混合冷媒の混合比率変化による伝熱面近傍におけるプール核沸騰熱伝達率および質量分率の特性解明実験
Thesis: Experimental Stady on Characterize Pool Nucleate Boiling Heat Transfer Coefficient and Mass Fraction near Heat Transfer Surface by Changing Mixing Ratio of Mixed Refrigerants

論文：並列多孔微細流路内における偏流の抑制に関する研究
Thesis: Study on Controlling the drift Flow in a Parallel Microchannels

論文：焼結製法による高気孔率金属繊維多孔質伝熱面におけるサブクール沸騰熱伝達による高熱流束除熱
Thesis: High Performance Cooling in Subcooled Boiling Heat Transfer Using High Porosity Sintered Fiber on the Surface

論文：並列多孔微細流路内における偏流の抑制に関する研究
Thesis: Study on the Elucidation of Flow Distribution of Two-phase Flow in the Parallel Mini-channel

論文：金属焼結多孔質管を用いたガス側の伝熱並びに圧力損失特性に関する実験的研究
Thesis: Experimental study on heat transfer and pressure drop characteristics on gas side using sintered metal porous tube

論文：金属焼結多孔質体を用いたガス側熱伝達向上に関する研究
Thesis: Study on improvement of gas side heat transfer using sintered metal porous body

論文：微細流路の形状変化による流動様相に及ぼす影響の解析
Thesis: Analysis of the influence on the flow aspect owing to the shape change of the micro channel

論文：波状形状を有する微細流路内の沸騰熱伝達と圧力損失特性
Thesis: The charactaristics of boiling heat transfer and pressure drop in wavy shape mini-channel.

論文：微細流路内気液二相流動現象の特性解明
Thesis: The characterization of vapor-liquid two-phase flow phenomena in small tube

論文：多穴微細流路熱交換器の気液二相流の可視化と偏流抑制対策
Thesis: Observation of vapor-liquid two-phase flow in parallel mini-channels and the elucidation of mechanisms of drift and back flow

論文：LNG冷熱の有効利用のための熱音響エンジン発電システム用熱交換器の高性能化に関する研究
Thesis: Study on high performance of heat exchanger for thermoacoustic engine power generation system for effective utilization of LNG cold heat

論文：多穴微細流路熱交換器の気液二相流の可視化と偏流抑制対策
Thesis: Observation of vapor-liquid two-phase flow in parallel mini-channels and the elucidation of mechanisms of drift and back flow

論文：水平矩形微細流路内気液二相流の流動様相に及ぼす振動の影響
Thesis: Effects of Oscillation on Vapor-liquid Two-phase Flow Patterns in Small Horizontal Rectangular Tube

論文：微細流路内気液二相流動現象の特性解明
Thesis: The characterization of vapor-liquid two-phase flow phenomena in small tube